ACE-CCP : ACUK-3xxx-AC

CNC billet case for Acewell ACE-3xxx speedometers.

How to check your lamps: undo the two small cross-head screws holding the warning lamps in the plastic housing and lift them out. If the symbols are printed on the lamps you removed, they can go into the billet case. If the symbol lenses have stayed in the plastic case, this billet case is not suitable.

Fitting means removing each pin from the speedometer's multipin plugs, feeding the wires through the case and refitting the plugs - you'll need a small flat-bladed screwdriver to release the pins.

Fits ACE-3xxx speedometers with warning lamps where the warning lamp lenses are clear and illuminate from coloured LEDs.
Not compatible with warning lamps that have a separate coloured lens.